Light blue yarn wrapped over a 2" sponge ball on a 15" tough pvc shaft. Designed exclusively for bass marimba and lower, the BM1 generates a deep, soft legato sound.
BM1 Bass Marimba - Soft
$36.00 pair
BM2 Rubber
A pure gum rubber ball, 5/8" x 15" hardwood shaft, and thick vinyl grip. Co-developed with Walt Hampton, these new beaters are the perfect design for bass marimba and lower. To play a rhythmically distinct bass line, choose these mallets, for they are the only mallets of their kind on the market!
BM2 Bass Marimba - Distinct
$60.00 pair
David Chung - Soft Marimba Mallets
16" Carbon Fiber Shafts wrapped with 3-ply acrylic yarn.
1-1/8" black Lexan ball. These xylophone mallets are extensions of the Cannon Balls. Bigger bite, bigger projection, full alto timbre. Hardwood shafts. Use only on synthetic bars.
EB8 1-1/8" Black Lexan ball
$20.00 pair
Soft Rubber
1-3/8" yellow, ribbed rubber ball, hardwood shaft. For low-end marimba. The weight of this mallet causes the bars to produce deep, fundamental sounds. Excellent for executing Alberti bass passages. Think deep!
FX1 Low-End Marimba
$21.00 pair
Medium Rubber
1-3/8" red, ribbed rubber ball, hardwood shaft. Excellent for xylophone and entire marimba. The weight of this mallet causes the bars to produce deep, fundamental sounds.
FX2 Xylo-Marimba
$21.00 pair
Cantabiles - Double Ended
Brass balls of 1/2" & 3/8" provide both a classic handbell tone quality as well as an authentic celeste sound. Dolce!
Red crocheted cord on a 15" tough, black nylon shaft. When the cord wears out, you have a brand new KR2 mallet underneath! Also available on hardwood shafts.
KC2 nylon shaft keyboard mallets
$26.00 pair
Hard Cord
Blue crocheted cord on a 15" tough, black nylon shaft. When the cord wears out, you have a brand new KR3 mallet underneath! Also available on hardwood shafts.
KC3 nylon shaft keyboard mallets
$26.00 pair
Soft Rubber
1" yellow rubber ball on a 15" tough, black nylon shaft. Use on marimba, temple blocks, and wood blocks. Also available on hardwood shafts.
KR1 nylon shaft keyboard mallets
$23.00 pair
Medium Rubber
1" red rubber ball on a 15" tough, black nylon shaft. Use on xylophone, marimba, temple blocks, and wood blocks. Also available on hardwood shafts.
KR2 nylon shaft keyboard mallets
$23.00 pair
Hard Rubber
1" blue rubber ball on a 15" tough, black nylon shaft. For xylophone and glockenspiel only. The hard ball is too harsh for lower instruments. Use on temple blocks and wood blocks. Also available on hardwood shafts.
KR3 nylon shaft keyboard mallets
$23.00 pair
Wood
1" Hardwood ball. These mallets are recommended for solo passages requiring the early traditional sound of wood on wood. 5/16" x 15" tough, nylon shafts. Also available on hardwood shafts.
KW9 Nylon shaft keyboard mallets
$14.00 pair
Soft Yarn
Yellow crocheted yarn on a 15" tough, black nylon shaft. When the yarn wears out, you have a brand new KR1 mallet underneath! Also available on hardwood shafts.
KY1 nylon shaft keyboard mallets
$26.00 pair
Medium Yarn
Red crocheted yarn on a 15" tough, black nylon shaft. When the yarn wears out, you have a brand new KR2 mallet underneath! Also available on hardwood shafts.
KY2 nylon shaft keyboard mallets
$26.00 pair
Hard Yarn
Blue crocheted yarn on a 15" tough, black nylon shaft. When the yarn wears out, you have a brand new KR3 mallet underneath! Also available on hardwood shafts.
KY3 nylon shaft keyboard mallets
$26.00 pair
Marching Keyboard
These relatively large and soft MB1s will make the Marimba low-end sound like a roaring pipe organ! Rubber cores are wrapped with a twisted 2-ply, wear-resistant yellow polyester thread. The vinyl-reinforced fiberglass shafts offer reliability, straightness, and longevity.
MB1 Low-End Marimba Mallets
$32.00 pair
Marching Keyboard
These relatively large and medium MB2s will offer more steam power for the marimba while delivering a projecting sound for the vibes. Rubber cores are wrapped with a twisted 2-ply, wear-resistant red polyester thread. The vinyl-reinforced fiberglass shafts offer reliability, straightness, and longevity.
MB2 Marimba and Vibraphone Mallets
$32.00 pair
Marching Keyboard
The size of the MB3s are universal and the sound is most advantageous, but the popularity is derived from the obvious communal role these mallets provide. Multi-purpose often means necessary! When the demand for quick changes from one keyboard to another develops, these are the mallets that should be in your hands. Rubber cores are wrapped with a twisted 2-ply, wear-resistant black polyester thread. The vinyl-reinforced fiberglass shafts offer reliability, straightness, and longevity.
MB3 Multi-Purpose Mallets
$32.00 pair
Marching Keyboard
To support the fact that high-end keyboards respond more generously with mallet heads harder than medium, these MB4s will punctuate with CAPITAL LETTERS any phrase challenging enough to require hours of practice. Rubber cores are wrapped with a twisted 2-ply, wear-resistant silver polyester thread. The vinyl-reinforced fiberglass shafts offer reliability, straightness, and longevity.
MB4 High-End Keyboard Mallets
$32.00 pair
Marching Keyboard
Whether one is playing on timpani, marimbas, or vibes, when the desire to point out the distinction between rapid successions of eighth, sixteenth, or thirty-second notes is absolute - especially in difficult passages - only an articulate mallet will be effective. Rubber cores are wrapped with a twisted 2-ply, wear-resistant bluepolyester thread. The vinyl-reinforced fiberglass shafts offer reliability,straightness, and longevity.
MB5 Articulate Keyboard Mallets
$32.00 pair
Marching Keyboard
These perfectly sized 1" Black Lexan balls provide a tenacious bite, extended projection, and a full mezzo-soprano timbre. The vinyl-reinforced fiberglass shafts offer reliability, straightness, and longevity. Use only on synthetic bars!
MB6 Extreme Articulation Keyboard Mallets
$25.00 pair
Soft Ribbed Marimba Mallet
1-3/8" yellow, ribbed rubber ball, tough 13" fiberglass shaft, vinyl grip for low-end marimba. The weight of this mallet causes the bars to produce deep, fundamental sounds. Excellent for executing Alberti bass passages. Think deep!
RX1 Low-End Marimba
$30.00 pair
Medium Ribbed Marimba Mallet
1-3/8" red, ribbed rubber ball, tough 13" fiberglass shaft with vinyl grip. Excellent for xylophone and full marimba. The weight of this mallet causes the bars to produce deep, fundamental sounds.
RX2 Xylo-Marimba
$30.00 pair
Cannon Balls
1" clear Lexan ball. These tough heads produce articulate, biting sounds. So popular are these mallets, the use of Lexan balls has become the industry standard for xylophone. 5/16" black nylon shafts. Also available on hardwood shafts. Use only on synthetic bars.
